Omni Receiver mouse detection #4321
Replies: 21 comments 67 replies
-
|
ROG Keris Wireless AimPoint,hope it can help you. |
Beta Was this translation helpful? Give feedback.
-
|
@4Spike ok, great. Can you check if this build detects mouse correctly and shows correct settings ? |
Beta Was this translation helpful? Give feedback.
-
|
settings work good. |
Beta Was this translation helpful? Give feedback.
-
|
keris ii ace |
Beta Was this translation helpful? Give feedback.
-
|
@woossa1987 thanks, updated build in a head post should now detect your model correctly. |
Beta Was this translation helpful? Give feedback.
-
|
log.txt |
Beta Was this translation helpful? Give feedback.
-
|
@ADMIPO can you try this build and post a log ? |
Beta Was this translation helpful? Give feedback.
-
|
This build works, Thank you! |
Beta Was this translation helpful? Give feedback.
-
|
@ADMIPO ok, great. Can you please check if wired version works as well ? |
Beta Was this translation helpful? Give feedback.
-
|
Changes are also live in https://github.com/seerge/g-helper/releases/tag/v0.218 |
Beta Was this translation helpful? Give feedback.
-
|
Yes, both wired with and without Omni receiver, the Keris Ace II buttom appears. And I can switch dpi with it. |
Beta Was this translation helpful? Give feedback.
-
|
Keris II Ace |
Beta Was this translation helpful? Give feedback.
-
|
@DamnZ thanks, updated build in a head post should now detect your model correctly. |
Beta Was this translation helpful? Give feedback.
-
|
Hello. Thank you for your work |
Beta Was this translation helpful? Give feedback.
-
|
Changes are also live in https://github.com/seerge/g-helper/releases/tag/v0.218 |
Beta Was this translation helpful? Give feedback.
-
|
@seerge Thank you one more time. I would be grateful if you could fix mistake in mouse name in future updates |
Beta Was this translation helpful? Give feedback.
-
|
I have re-released 0.218 again with a typo fix. Thanks. |
Beta Was this translation helpful? Give feedback.
-
|
Finally works. Well done!!! Much thanks!!! |
Beta Was this translation helpful? Give feedback.
-
|
Hi @seerge, I ran 0.218 with my Rog Harpe Ace Aimlab Edition (white). I originally posted issue #3693 about support for the 4k and 8k polling rates. In this new version, my mouse is now being detected as a Harpe Ace Mini, and the polling rate dropdown seems to have reverted to the old version that supports only up to 1khz. I also get the previous crash when I attempt to change that polling rate. Here's a screenshot and my log file. 
[log.txt](https://github.com/user-attachments/files/21275604/log.txt)
|
Beta Was this translation helpful? Give feedback.
-
|
@Crysalim can you please upload the log from the app ? Thanks. |
Beta Was this translation helpful? Give feedback.
-
|
Looks like my previous post didn't make a clickable link out of the log for some reason. Here's one from just a moment ago. |
Beta Was this translation helpful? Give feedback.
-
|
@Crysalim thanks, the signature of your mouse is almost same as Harpe Mini, so I had to use first 3 letters instead of 2 now to identify it. Build in a head post should detect your mouse correctly now :) Thanks. |
Beta Was this translation helpful? Give feedback.
-
|
log.txt |
Beta Was this translation helpful? Give feedback.
-
|
i use the ROG Keris Wireless AimPoint，But it shows Harpe Ace Aimlab |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
|
@ggfong you are not using the latest build, it seems |
Beta Was this translation helpful? Give feedback.
-
i use the v0.219 version |
Beta Was this translation helpful? Give feedback.
-
|
@ggfong this build GHelper.zip should detect it correctly |
Beta Was this translation helpful? Give feedback.
-
|
Hello, ROG Keris II Ace connected with rate booster doesn't show 2k,4k and 8k options in polling rate dropdown, 1k max |
Beta Was this translation helpful? Give feedback.
-
|
@Fireal because I don't know how exactly setting via booster works (please check original request issue for more details) |
Beta Was this translation helpful? Give feedback.
-
|
ROG KERIS II ORIGIN (ROG KERIS II RGB) |
Beta Was this translation helpful? Give feedback.
-
|
thanks |
Beta Was this translation helpful? Give feedback.
-
|
@CookieziAsh does it work correctly ? |
Beta Was this translation helpful? Give feedback.
-
|
@seerge sorry i'm late,it works,Will this be updated in the next version? |
Beta Was this translation helpful? Give feedback.
-
|
@CookieziAsh yes, it will be included |
Beta Was this translation helpful? Give feedback.
-
|
thanks |
Beta Was this translation helpful? Give feedback.
-
|
with the latest 0.220.0 Keris Wireless Aimpoint is recognized as harpe ace |
Beta Was this translation helpful? Give feedback.
-
|
@wj123567 hello, thanks, this build should include your signature |
Beta Was this translation helpful? Give feedback.
-
|
thanks recognized correctly |
Beta Was this translation helpful? Give feedback.
-
Why is my Hrape Mini recognizing abnormalities？ Because I have a Azoth keyboard connected to the receiver?
|
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
|
@NewAus hello, this build should detect it correctly |
Beta Was this translation helpful? Give feedback.
-
|
Thanks,it works well |
Beta Was this translation helpful? Give feedback.
-
|
Rog keris aimpoint |
Beta Was this translation helpful? Give feedback.
-
|
@wonho310-user thanks, I have added your signature as well. This build should detect it correctly. |
Beta Was this translation helpful? Give feedback.
-
|
Great!!! |
Beta Was this translation helpful? Give feedback.
-
|
ROG Gladius III Wireless Aimpoint (Omni Receiver paired with an Azoth) |
Beta Was this translation helpful? Give feedback.
-
|
ROG Gladius III Wireless Aimpoint (Omni Receiver standalone, unpaired Azoth) |
Beta Was this translation helpful? Give feedback.
-
|
@ro-mancilla hello, thanks. But I didn't completely get it. Is your ROG Gladius III Wirless also connected via Omni ? (as it's quite old mouse, so I didn't know if it supports Omni) ? |
Beta Was this translation helpful? Give feedback.
-
|
@ro-mancilla ok, I have did some research and looks like ROG Gladius III Wireless Aimpoint is indeed added for Omni support now. This build should detect your device correctly (if not - post a log), thanks |
Beta Was this translation helpful? Give feedback.
-
|
It's recognized. Excellent work! |
Beta Was this translation helpful? Give feedback.
-
|
Recently updated to v0.226, and noticed it was still showing up as "Wireless", so updated the firmware from the Asus' official website (https://rog.asus.com/mice-mouse-pads/mice/ergonomic-right-handed/rog-gladius-iii-wireless-aimpoint-model/helpdesk_bios/) Exited G-helper, updated the firmware, started G-Helper and it was showing up as "Harpe Ace" mouse. ROG Gladius III Wireless Aimpoint (Omni Receiver standalone) - log.txt |
Beta Was this translation helpful? Give feedback.
-
|
Screenshot showing the mouse connected through the receiver, and through wired 
|
Beta Was this translation helpful? Give feedback.
-
|
@miguelfradinho hello, you still have receiver plugged into the device (and paired with the mouse). So it shows it even if the mouse is not connected to the receiver (as it's connected by wire atm) I have updated signature, even tho Try this build |
Beta Was this translation helpful? Give feedback.
-
|
Ah, thanks for the clarification! 🙌 It shows up as "Rog Aimpoint III (Omni)" correctly with that build, thanks for the quick reply! |
Beta Was this translation helpful? Give feedback.
-
|
👋😀 |
Beta Was this translation helpful? Give feedback.
-
|
@czhoon hello, thanks. This build should detect it correctly via Omni receiver. But since it was no support for your model at all, some settings may be different (i just copied Harpe Ace Aimlab profile here). Can you post a separate peripherals support request here using a template and fill in all asked data ? Then I can add support also for a wired connection of this mouse. Thanks! |
Beta Was this translation helpful? Give feedback.
-
|
I'm currently using a gladius aimpoint but it's showing as keris |
Beta Was this translation helpful? Give feedback.
-
|
@afk311 this build should detect your mouse correctly |
Beta Was this translation helpful? Give feedback.
-
|
It works great! |
Beta Was this translation helpful? Give feedback.
-
|
Hi there, I am currently using one Omni receiver for both my mouse(Harpr Ace) and keyboard(Strix Scope), but in G-Helper, it only has my mouse information, but no keyboard. Do u know how to fix this? 
|
Beta Was this translation helpful? Give feedback.
-
|
ROG Gladius III Aimpoint，thanks |
Beta Was this translation helpful? Give feedback.
-
|
@838566240-netizen thanks, this build should detect it |
Beta Was this translation helpful? Give feedback.
-
|
It works now，thanks |
Beta Was this translation helpful? Give feedback.
-
|
Just bought a Harpe ii Ace. Looks like we got a new variant of receiver. |
Beta Was this translation helpful? Give feedback.
-
|
@Benson5650 that doesn't look like a Omni receiver but as a proprietary Harpe II Ace receiver :) (with own device ID) |
Beta Was this translation helpful? Give feedback.
and others
Uh oh!
There was an error while loading. Please reload this page.
Uh oh!
There was an error while loading. Please reload this page.
-
Hello fellow community,
Currently, G-Helper detects ASUS mice based on their USB device ID, as each model has a unique ID.
The only exception is when the mouse is connected via an Omni receiver. In that case, the USB ID corresponds to the receiver itself, and all such models are currently shown as Harpe Ace Aimlab.
I would like to teach G-Helper to recognize the correct mouse model behind the receiver. To do this, I need to collect the mouse signatures that the receiver reports.
Please use this build, connect your mouse via the Omni receiver, and post the log file located at
%appdata%\GHelperafter running the application.Thanks in advance!
Changes live in https://github.com/seerge/g-helper/releases
Existing "signatures"
1. ROG Harpe Ace Aim Lab Edition (supported, default)
42-32-33-30-37-32-38-30-30-30-36-32 = B2307280006242-32-34-31-32-32-36-36-36-37-37-31 = B24122666771(wrong signature?)42-32-34-31-32-32-36-36-39-35-34-38 = B24122669548ROG Harpe Ace Aim Lab Edition missing name + controls over BT/dongle #453242-32-35-30-31-30-34-37-36-35-32-34 = B25010476524ROG Harpe Ace Aim Lab Edition missing name #486542-32-35-30-34-33-30-36-33-31-34-38 = B25043063148[Bug] ROG Harpe Ace Aim Lab Edition misidentified as "Harpe Ace Mini (OMNI)". #51142. ROG Harpe Ace Mini (supported)
42-32-34-30-38-32-35-35-30-38-33-33 = B2408255083342-32-34-31-32-32-36-36-36-30-36-31 = B2412266606153-37-4D-50-4B-52-30-35-33-38-34-37 = S7MPKR05384742-32-35-30-33-30-38-31-37-31-38-36 = B25030817186(Ace Mini + Azoth keyboard) ?3. ROG Keris Wireless Aimpoint (supported)
52-39-30-35-31-38-33-30-30-35-37-32 = R9051830057246-32-34-42-32-31-44-44-30-33-46-34 = F24B21DD03F446-42-41-30-43-43-31-44-36-46-39-43 = FBA0CC1D6F9C52-31-33-31-32-31-33-35-31-33-39-31 = R131213513914. ROG Keris II Ace (supported)
30-32-34-30-33-31-33-31-36-39-36-39 = 02403131696930-32-34-31-31-31-32-33-30-31-35-32 = 02411123015230-32-34-30-39-32-32-39-31-39-32-31 = 02409229192130-32-35-30-31-30-35-30-32-37-39-38 = 0250105027981(with booster) ?5. ROG Harpe Ace Extreme
54-35-4D-50-4B-52-30-31-38-34-30-36 = T5MPKR0184066. ROG Strix Impact III Wireless (supported)
32-30-32-34-30-35-32-39-30-37-30-30 = 2024052907007. ROG Keris II Origin
30-32-35-30-35-30-36-31-33-37-30-30 = 0250506137008. ROG Gladius III Aimpoint
52-38-32-30-32-30-31-35-35-36-38-39 = R8202015568952-36-30-31-32-30-33-33-31-37-38-37 = R6012033178752-39-30-33-31-39-32-31-35-38-38-31 = R9031921588152-39-32-33-30-37-34-31-30-37-31-30 = R9230741071052-43-31-35-31-39-34-33-30-34-35-35 = RC1519430455Beta Was this translation helpful? Give feedback.
All reactions