Button: Don´t incude in Statistics / Don´t track loadpoint energy consumption

[moku01]

Is your feature request related to a problem? Please describe.

My ISG from Stibel Etron displays always wong consumption values which therfore breaks the hole statistic of my ecvv charging cost of the ev. I use evcc to enable the "status 3" in the ISG because in evcc i can use the loadpoint settings to specify the on / off values. In the past i used the direct inverter signal but that lead to an extreamly high amount of power cycels of the heatpump.

(knowen problem, the isg wont publish the correct value via modebus - so evcc always uses the max. charging power as the current energy consumption if the status is on . I reduced it to 1 Amp to reduce the effect.)

Describe the solution you'd like

A Button in the loadpoint confic to enabel / disable the energy consumption mesuremt so the wrong values wont be an issue anymore.

Describe alternatives you've considered

a "Dummy" power-meter for the loadpoint which always "mesures" 0 / 0,1 w of power

Additional context

[naltatis]

Sounds like a specific issue with the Stibel Eltron device or your specific configuration. Not a general issue.
Adding a dedicated meter for the device is not a possibility?

[wittmannchris]

Stiebel only tracks the Verdichter. Not the overall consumption.

Shelly Em3 is a solution for instance.